Original file

BMW 5 Serie - Sedan Bosch EDC17CP45 0281016938 / 1037509484

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW 5 Serie - Sedan, hardware number 0281016938 and software number 1037509484, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedandiesel
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
16,384.00 KB · Flash
Hardware number
0281016938
Software number
1037509484

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan
Enginediesel
Displacement3.0
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number0281016938
Software number1037509484
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File keye28b4c163568c2e4
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037509484Offset in the file: 0x01801A
Data set descriptionN57D30U0-F10_ECE_N57UL_AT
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_731//VBLA///Offset in the file: 0x250960

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016938 and software number 1037509484. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

HardwareSoftwareVehicles
02810161831037513582BMW X6
02810161831037515071BMW X5, BMW X6, BMW X6 X6-4.0D
02810167431037500778BMW 7 Serie - Sedan 730d, BMW 7 Serie - Sedan
02810167481037509485BMW 5 Serie - Sedan, BMW F10/F11/F18
0281016938DDE731BMW 5 Serie - Sedan
02810170181037507450BMW X6, BMW X5, BMW E70/E71
02810170181037513581BMW X5
02810170181037515070BMW X5, BMW X6, BMW E70

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page