Original file

BMW 5er Bosch EDC17CP45 0281031003 / 1037538404

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in BMW 5er, hardware number 0281031003 and software number 1037538404, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031003
Software number
1037538404
Vehicle maker's hardware number
8580309

Technical data

Vehicle
BrandBMW
Car model5er
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware number0281031003
Software number1037538404
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameL533CC0
File keyb283416cb5b461dc
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037538404Offset in the file: 0x02001A
Vehicle maker's hardware number8580309Offset in the file: 0x00FEAA
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_730//VAWF///Offset in the file: 0x24EF74

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031003 and software number 1037538404. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page