Original file

Mercedes-Benz E350 Bosch EDC17CP46 0104482940 / 0104482940

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz E350, hardware number 0104482940 and software number 0104482940, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3503.0 diesel · 265.0PS / 194.9kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0104482940
Software number
0104482940
Bosch part / software
10SW042657
Software / calibration
6429024703

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine3.0 diesel
Power265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0104482940
Software number0104482940
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydd813ade8c4f78a2
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW042657Offset in the file: 0x24001A
Software / calibration6429024703Offset in the file: 0x27F13D
Data set number6429038013Offset in the file: 0x27F148
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GLN__CV182300///Offset in the file: 0x241080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0104482940 and software number 0104482940. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
00644671400064467140Mercedes-Benz CLS350
00644671401037512404Mercedes-Benz E 350 2011 Turbo
00644671401037512448Mercedes-Benz R300
00644671401037512495Mercedes-Benz cls 350 2010 194.9KWKW
01044829401037503394Mercedes-Benz C350 3.0 CDI V6, Mercedes-Benz E350 3.0 CDI V6, Mercedes-Benz ML350 3.0 CDI V6
01044829401037512447Mercedes-Benz R350 3.0 CDI V6
01044829401037525430Mercedes-Benz CLS350
01044829401037525444Mercedes-Benz E300 3.0 CDI V6

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page