Original file

Mercedes-Benz R350 3.0 CDI V6 Bosch EDC17CP46 0104482940 / 1037512447

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz R350 3.0 CDI V6, hardware number 0104482940 and software number 1037512447, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz R350 3.0 CDI V63.0 diesel 265.0PS / 194.9kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0104482940
Software number
1037512447
Software / calibration
6429023101

Technical data

Vehicle
BrandMercedes-Benz
Car modelR350 3.0 CDI V6
Engine3.0 diesel 265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0104482940
Software number1037512447
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key48da35b3f3d8c7d9
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
Bosch part / software1037512447Offset in the file: 0x10201A
Software / calibration6429023101Offset in the file: 0x01AE3F
Data set number6429031802Offset in the file: 0x01AE4A
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_7AL9__CV103500///Offset in the file: 0x102BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0104482940 and software number 1037512447. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
00644671401037512448Mercedes-Benz R300
00644671401037512495Mercedes-Benz cls 350 2010 194.9KWKW
01044829400104482940Mercedes-Benz E350
01044829401037503394Mercedes-Benz C350 3.0 CDI V6, Mercedes-Benz E350 3.0 CDI V6, Mercedes-Benz ML350 3.0 CDI V6
01044829401037525430Mercedes-Benz CLS350
01044829401037525444Mercedes-Benz E300 3.0 CDI V6
01044829401037529301Mercedes-Benz CLS350 3.0 CDI V6
01044829401037543363Mercedes-Benz ML350 3.0 CDI V6

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page