Original file

Mercedes-Benz E300 3.0 CDI V6 Bosch EDC17CP46 0104482940 / 1037525444

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz E300 3.0 CDI V6, hardware number 0104482940 and software number 1037525444, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E300 3.0 CDI V63.0 diesel 231.0PS / 169.9kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
3,072.00 KB · Flash
Hardware number
0104482940
Software number
1037525444
Software / calibration
6429028501

Technical data

Vehicle
BrandMercedes-Benz
Car modelE300 3.0 CDI V6
Engine3.0 diesel 231.0PS / 169.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0104482940
Software number1037525444
File
File typeOriginal flash read
File size3,072.00 KB (3,145,728 bytes)
File key3a133d554f837426
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
Bosch part / software1037525444Offset in the file: 0x0E401A
Software / calibration6429028501Offset in the file: 0x004BFD
Data set number6429038804Offset in the file: 0x004C08
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GL1__CV122400///Offset in the file: 0x0E4BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0104482940 and software number 1037525444. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
01044829400104482940Mercedes-Benz E350
01044829401037503394Mercedes-Benz C350 3.0 CDI V6, Mercedes-Benz E350 3.0 CDI V6, Mercedes-Benz ML350 3.0 CDI V6
01044829401037512447Mercedes-Benz R350 3.0 CDI V6
01044829401037525430Mercedes-Benz CLS350
01044829401037529301Mercedes-Benz CLS350 3.0 CDI V6
01044829401037543363Mercedes-Benz ML350 3.0 CDI V6
01044829406429024703 - 6429037913Mercedes-Benz C 3.0 CDI V6
02810166561037503394Mercedes-Benz CLS 350 2011 Turbo, Mercedes-Benz E350 CGI V6 Blue, Mercedes-Benz E

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page