Original file

Mercedes-Benz C 3.0 CDI V6 Bosch EDC17CP46 0104482940 / 6429024703 - 6429037913

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz C 3.0 CDI V6, hardware number 0104482940 and software number 6429024703 - 6429037913, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C 3.0 CDI V63.0 diesel 265.0PS / 194.9kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0104482940
Software number
6429024703 - 6429037913
Bosch part / software
10SW064962
Software / calibration
6429020404

Technical data

Vehicle
BrandMercedes-Benz
Car modelC 3.0 CDI V6
Engine3.0 diesel 265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0104482940
Software number6429024703 - 6429037913
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key21f34d03da2ed173
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW064962Offset in the file: 0x24001A
Software / calibration6429020404Offset in the file: 0x27F161
Data set number6429037016Offset in the file: 0x27F16C
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GLO__CV200500///Offset in the file: 0x241080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0104482940 and software number 6429024703 - 6429037913. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
01044829401037525430Mercedes-Benz CLS350
01044829401037525444Mercedes-Benz E300 3.0 CDI V6
01044829401037529301Mercedes-Benz CLS350 3.0 CDI V6
01044829401037543363Mercedes-Benz ML350 3.0 CDI V6
02810166561037503394Mercedes-Benz CLS 350 2011 Turbo, Mercedes-Benz E350 CGI V6 Blue, Mercedes-Benz E
02810166561037512477Mercedes-Benz R350
02810166561037512493Mercedes-Benz E350
02810166561037543366Mercedes-Benz S350

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page