Original file

Mercedes-Benz GLK220 Bosch EDC17CP46 0281018333 / 1037533753

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK220, hardware number 0281018333 and software number 1037533753, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK2202.1 diesel · 170.0PS / 125.0kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281018333
Software number
1037533753
Software / calibration
6519023001

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK220
Engine2.1 diesel
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0281018333
Software number1037533753
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyeb4fbf8c4c9f85dc
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037533753Offset in the file: 0x00001A
Software / calibration6519023001Offset in the file: 0x063041
Data set number6519038627Offset in the file: 0x06304C
Boot software6519040101Offset in the file: 0x063036
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGW1__CV123100///Offset in the file: 0x000BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018333 and software number 1037533753. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
02810166561037503394Mercedes-Benz CLS 350 2011 Turbo, Mercedes-Benz E350 CGI V6 Blue, Mercedes-Benz E
02810166561037512477Mercedes-Benz R350
02810166561037512493Mercedes-Benz E350
02810166561037543366Mercedes-Benz S350
02810188551037533577Mercedes-Benz ML 350CDI
02810188551037534034Mercedes-Benz GL350
02810188551037542506Mercedes-Benz GL350
028101885510SW003819Mercedes-Benz ML350

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page