Original file

Mercedes-Benz Sprinter Bosch EDC17CP46 0281018932 / 1037516354

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter, hardware number 0281018932 and software number 1037516354, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.1 diesel 210PS
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281018932
Software number
1037516354
Bosch part / software
10SW010725
Software / calibration
6429027202

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.1 diesel 210PS
Power210.0PS / 154.5kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0281018932
Software number1037516354
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3464ec50d699481a
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW010725Offset in the file: 0x02001A
Software / calibration6429027202Offset in the file: 0x02022F
Data set number6429039610Offset in the file: 0x206214
Boot software6429040300Offset in the file: 0x00FC51
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGL1__CV161300///Offset in the file: 0x058B68

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018932 and software number 1037516354. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz Sprinter 2013yFlash · From the file name: Mercedes Sprinter 2013y 190PS 140KW64.00 KB€15Add to cart
Mercedes-Benz Sprinter 2013yFlash · From the file name: Mercedes Sprinter 2013y 190PS 140KW4,096.00 KB€15Add to cart

All reads of 0281018932 / 1037516354

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
02810188551037533577Mercedes-Benz ML 350CDI
02810188551037534034Mercedes-Benz GL350
02810188551037542506Mercedes-Benz GL350
028101885510SW003819Mercedes-Benz ML350
02810189321037535765Mercedes-Benz Sprinter 519
02810194171037516343Mercedes-Benz ML350
02810194171037541909Mercedes-Benz ML350
02810194171037541913Mercedes-Benz GL350

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page