Original file

Mercedes-Benz Sprinter 519 Bosch EDC17CP46 0281018932 / 1037535765

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter 519, hardware number 0281018932 and software number 1037535765, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 5193.0 petrol 190PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281018932
Software number
1037535765
Software / calibration
6429020302

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 519
Engine3.0 petrol 190PS
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0281018932
Software number1037535765
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key78eba852eee87de2
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037535765Offset in the file: 0x14001A
Software / calibration6429020302Offset in the file: 0x195D6B
Data set number6429034306Offset in the file: 0x195D76
Boot software6429040300Offset in the file: 0x195D60
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DCC1__CV131200///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018932 and software number 1037535765. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
02810188551037534034Mercedes-Benz GL350
02810188551037542506Mercedes-Benz GL350
028101885510SW003819Mercedes-Benz ML350
02810189321037516354Mercedes-Benz Sprinter 2013y, Mercedes-Benz Sprinter
02810194171037516343Mercedes-Benz ML350
02810194171037541909Mercedes-Benz ML350
02810194171037541913Mercedes-Benz GL350
05045557691037555769Mercedes-Benz Sprinter

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page