Original file

Mercedes-Benz ML350 Bosch EDC17CP46 0281019417 / 1037516343

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz ML350, hardware number 0281019417 and software number 1037516343, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML3503.0 258PS
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281019417
Software number
1037516343
Bosch part / software
1037533577
Software / calibration
6429027501

Technical data

Vehicle
BrandMercedes-Benz
Car modelML350
Engine3.0 258PS
FuelDiesel
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0281019417
Software number1037516343
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1b10e9ac49cb362c
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037533577Offset in the file: 0x02001A
Software / calibration6429027501Offset in the file: 0x02022F
Data set number6429032306Offset in the file: 0x399EAA
Boot software6429040200Offset in the file: 0x00FC51
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_BJL1__CV125000///Offset in the file: 0x056950

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019417 and software number 1037516343. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
02810188551037542506Mercedes-Benz GL350
028101885510SW003819Mercedes-Benz ML350
02810189321037516354Mercedes-Benz Sprinter 2013y, Mercedes-Benz Sprinter
02810189321037535765Mercedes-Benz Sprinter 519
02810194171037541909Mercedes-Benz ML350
02810194171037541913Mercedes-Benz GL350
05045557691037555769Mercedes-Benz Sprinter
09570164861037516354Mercedes-Benz Sprinter

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page