Original file

Mercedes-Benz ML350 Bosch EDC17CP46 0281019417 / 1037541909

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz ML350, hardware number 0281019417 and software number 1037541909, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML350OM642 · 258PS / 189.8kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019417
Software number
1037541909
Software / calibration
6429027501

Technical data

Vehicle
BrandMercedes-Benz
Car modelML350
EngineOM642
FuelDiesel
Displacement3.0
Power258PS / 189.8kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number0281019417
Software number1037541909
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf490be5ebcff2af6
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037541909Offset in the file: 0x14001A
Software / calibration6429027501Offset in the file: 0x199E9F
Data set number6429036107Offset in the file: 0x199EAA
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_BJL1__CV125000///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019417 and software number 1037541909. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
028101885510SW003819Mercedes-Benz ML350
02810189321037516354Mercedes-Benz Sprinter 2013y, Mercedes-Benz Sprinter
02810189321037535765Mercedes-Benz Sprinter 519
02810194171037516343Mercedes-Benz ML350
02810194171037541913Mercedes-Benz GL350
05045557691037555769Mercedes-Benz Sprinter
09570164861037516354Mercedes-Benz Sprinter
64290111006429022602Mercedes-Benz Sprinter 3.0 CDI

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page