Original file

Mercedes-Benz Sprinter Bosch EDC17CP46 1037551976

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter, software number 1037551976, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel · 140KW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Software number
1037551976
Software / calibration
6429021502

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel
Displacement3.0
Power140KW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Software number1037551976
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5ea9b804cb6d333c
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037551976Offset in the file: 0x34001A
Software / calibration6429021502Offset in the file: 0x2061ED
Data set number6429031108Offset in the file: 0x2061F8
Boot software6429040300Offset in the file: 0x2061E2
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CEL1__CV133000///Offset in the file: 0x340BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037551976. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash4,096.00 KB€15Add to cart
Mercedes-Benz Sprinter216/316/416/516Flash2,048.00 KB€15Add to cart
Mercedes-Benz SprinterFlash4,096.00 KB€15Add to cart

All reads of 1037551976

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
1037529328Mercedes-Benz ML166
1037535765Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
1037539966Mercedes-Benz Sprinter Class W906,W909 3.0CDI
1037543352Mercedes-Benz
1037551980Mercedes-Benz Sprinter
1037555769Mercedes-Benz Sprinter 3.0CDI
10SW009552Mercedes-Benz Sprinter 2016y 319CDI
10SW014397Mercedes-Benz

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page