Original file
Mercedes-Benz Sprinter Bosch EDC17CP46 10SW070345
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter, software number 10SW070345, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Sprinter3.0 diesel 189PS
- Control unit
- Bosch EDC17CP46
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Software number
- 10SW070345
- Software / calibration
- 6429027203
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Sprinter |
| Engine | 3.0 diesel 189PS |
| Power | 189.3PS / 139.2kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW070345 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | d0825ba172a79445 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW070345 | Offset in the file: 0x34001A |
| Software / calibration | 6429027203 | Offset in the file: 0x205131 |
| Data set number | 6429034917 | Offset in the file: 0x20513C |
| Boot software | 6429040300 | Offset in the file: 0x205126 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_CVL0__CV201300/// | Offset in the file: 0x341080 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW070345. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| 1037551980 | Mercedes-Benz Sprinter | |
| 1037555769 | Mercedes-Benz Sprinter 3.0CDI | |
| 10SW009552 | Mercedes-Benz Sprinter 2016y 319CDI | |
| 10SW014397 | Mercedes-Benz | |
| 0064467140 | Mercedes-Benz ML350 | |
| 0064467140 | 0064467140 | Mercedes-Benz CLS350 |
| 0064467140 | 1037512404 | Mercedes-Benz E 350 2011 Turbo |
| 0064467140 | 1037512448 | Mercedes-Benz R300 |