Original file

Mercedes-Benz Sprinter 3.0 CDI Bosch EDC17CP46 6429011100 / 6429022602

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter 3.0 CDI, hardware number 6429011100 and software number 6429022602, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter 3.0 CDI3.0 diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6429011100
Software number
6429022602
Bosch part / software
10SW011466

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter 3.0 CDI
Engine3.0 diesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429011100
Software number6429022602
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd4e03dec4cde6400
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW011466Offset in the file: 0x14001A
Software / calibration6429022602Offset in the file: 0x0044E5
Data set number6429038807Offset in the file: 0x0044F0
Boot software6429040300Offset in the file: 0x0044DA
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DEC1__CV145000///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429011100 and software number 6429022602. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
02810194171037541909Mercedes-Benz ML350
02810194171037541913Mercedes-Benz GL350
05045557691037555769Mercedes-Benz Sprinter
09570164861037516354Mercedes-Benz Sprinter
64290115001037516343Mercedes-Benz GL 350 CDI
642902040210SW003958 P695BLL0Mercedes-Benz ML 350 CDI
642902040210SW003960 P695BLL0Mercedes-Benz GL 350 D
64290206021037503394Mercedes-Benz ML 350 CDI

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page