Original file

Mercedes-Benz GL 350 D Bosch EDC17CP46 6429020402 / 10SW003960 P695BLL0

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GL 350 D, hardware number 6429020402 and software number 10SW003960 P695BLL0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GL 350 Ddiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429020402
Software number
10SW003960 P695BLL0
Bosch part / software
10SW003960

Technical data

Vehicle
BrandMercedes-Benz
Car modelGL 350 D
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429020402
Software number10SW003960 P695BLL0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycdcd7fa932aef230
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW003960Offset in the file: 0x14001A
Software / calibration6429020402Offset in the file: 0x19B537
Data set number6429039109Offset in the file: 0x19B542
Boot software0009040200Offset in the file: 0x19B52C
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_BLL0__CV134100///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429020402 and software number 10SW003960 P695BLL0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
09570164861037516354Mercedes-Benz Sprinter
64290111006429022602Mercedes-Benz Sprinter 3.0 CDI
64290115001037516343Mercedes-Benz GL 350 CDI
642902040210SW003958 P695BLL0Mercedes-Benz ML 350 CDI
64290206021037503394Mercedes-Benz ML 350 CDI
64290206021037543366Mercedes-Benz S 350 CDI
64290215011037503394Mercedes-Benz C 350 CDI
642902210410SW083125 P6959GLJMercedes-Benz ML 350 D

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page