Original file

Mercedes-Benz E 350 CDI Bosch EDC17CP46 6429024003 / 10SW049467 P6957EL0

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz E 350 CDI, hardware number 6429024003 and software number 10SW049467 P6957EL0, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 CDIdiesel 265.0PS / 194.9kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
8,192.00 KB · Flash
Hardware number
6429024003
Software number
10SW049467 P6957EL0
Bosch part / software
10SW049467

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 CDI
Enginediesel 265.0PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429024003
Software number10SW049467 P6957EL0
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyc165ae655055df89
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW049467Offset in the file: 0x24001A
Software / calibration6429024003Offset in the file: 0x223A59
Data set number6429036114Offset in the file: 0x223A64
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_7EL0__CV184000///Offset in the file: 0x241080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429024003 and software number 10SW049467 P6957EL0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
64290231011037503394Mercedes-Benz CLS 350 CDI, Mercedes-Benz E 350 CDI, Mercedes-Benz R 350 CDI
64290235011037503394Mercedes-Benz ML 350 CDI
64290235011037516312Mercedes-Benz ML 350 CDI
642902400310SW030902 P6957EL0Mercedes-Benz E 350 CDI
64290242041037516354Mercedes-Benz Sprinter 219/319/419/519 CDI
642902430310SW056402 P695BJLOMercedes-Benz ML 350 CDI
642902470310SW042663 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW042664 P6959GLNMercedes-Benz CLS 350 CDI

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page