Original file

Mercedes-Benz ML 350 CDI Bosch EDC17CP46 6429024303 / 10SW056402 P695BJLO

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz ML 350 CDI, hardware number 6429024303 and software number 10SW056402 P695BJLO, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML 350 CDIdiesel 258PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429024303
Software number
10SW056402 P695BJLO
Bosch part / software
10SW056402

Technical data

Vehicle
BrandMercedes-Benz
Car modelML 350 CDI
Enginediesel 258PS
Displacement3.0
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429024303
Software number10SW056402 P695BJLO
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc2b869b92820c224
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW056402Offset in the file: 0x14001A
Software / calibration6429024303Offset in the file: 0x1A0E1F
Data set number6429033815Offset in the file: 0x1A0E2A
Boot software6429040200Offset in the file: 0x1A0E14
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_BJLO__CV191200///Offset in the file: 0x141080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429024303 and software number 10SW056402 P695BJLO. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
64290235011037516312Mercedes-Benz ML 350 CDI
642902400310SW030902 P6957EL0Mercedes-Benz E 350 CDI
642902400310SW049467 P6957EL0Mercedes-Benz E 350 CDI
64290242041037516354Mercedes-Benz Sprinter 219/319/419/519 CDI
642902470310SW042663 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW042664 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW045173 P6959GLNMercedes-Benz GLK 350 CDI
64290247036429037913Mercedes-Benz C 3.0 CDI Blue Efficiency V6

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page