Original file

Mercedes-Benz C 3.0 CDI Blue Efficiency V6 Bosch EDC17CP46 6429024703 / 6429037913

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz C 3.0 CDI Blue Efficiency V6, hardware number 6429024703 and software number 6429037913, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C 3.0 CDI Blue Efficiency V63.0 diesel 211.0PS / 155.2kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
6429024703
Software number
6429037913
Bosch part / software
10SW042655

Technical data

Vehicle
BrandMercedes-Benz
Car modelC 3.0 CDI Blue Efficiency V6
Engine3.0 diesel 211.0PS / 155.2kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429024703
Software number6429037913
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb95570f195248b99
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
Bosch part / software10SW042655Offset in the file: 0x10201A
Software / calibration6429024703Offset in the file: 0x02313D
Data set number6429037913Offset in the file: 0x023148
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GLN__CV182300///Offset in the file: 0x103080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429024703 and software number 6429037913. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
642902430310SW056402 P695BJLOMercedes-Benz ML 350 CDI
642902470310SW042663 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW042664 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW045173 P6959GLNMercedes-Benz GLK 350 CDI
64290248041037503394Mercedes-Benz S 350 CDI
64290258011037516375Mercedes-Benz CLS 350 CDI
64290275011037534034Mercedes-Benz E350 3.0d
64290275011037541909Mercedes-Benz ML 350 CDI

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page