Original file

Mercedes-Benz S 350 CDI Bosch EDC17CP46 6429024804 / 1037503394

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz S 350 CDI, hardware number 6429024804 and software number 1037503394, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S 350 CDIdiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
6429024804
Software number
1037503394
Bosch part / software
10SW083097

Technical data

Vehicle
BrandMercedes-Benz
Car modelS 350 CDI
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6429024804
Software number1037503394
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfc5b65427e772543
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW083097Offset in the file: 0x02001A
Software / calibration6429024804Offset in the file: 0x02022B
Data set number6429031618Offset in the file: 0x28241C
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GLJ__CV205000///Offset in the file: 0x04FDC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429024804 and software number 1037503394. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
642902470310SW042663 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW042664 P6959GLNMercedes-Benz CLS 350 CDI
642902470310SW045173 P6959GLNMercedes-Benz GLK 350 CDI
64290247036429037913Mercedes-Benz C 3.0 CDI Blue Efficiency V6
64290258011037516375Mercedes-Benz CLS 350 CDI
64290275011037534034Mercedes-Benz E350 3.0d
64290275011037541909Mercedes-Benz ML 350 CDI
64290282011037529278Mercedes-Benz GL 350 D

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page