Original file
Mercedes-Benz ML 350 CDI Bosch EDC17CP46 6429040200 / 10SW003825 P695BJL3
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz ML 350 CDI, hardware number 6429040200 and software number 10SW003825 P695BJL3, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz ML 350 CDIdiesel 258.0PS / 189.8kW
- Control unit
- Bosch EDC17CP46
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 6429040200
- Software number
- 10SW003825 P695BJL3
- Bosch part / software
- 10SW003825
- Software / calibration
- 6429025702
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | ML 350 CDI |
| Engine | diesel 258.0PS / 189.8kW |
| Displacement | 3.0 |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 6429040200 |
| Software number | 10SW003825 P695BJL3 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | e078c23b47930708 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW003825 | Offset in the file: 0x14001A |
| Software / calibration | 6429025702 | Offset in the file: 0x199F2B |
| Data set number | 6429034709 | Offset in the file: 0x199F36 |
| Boot software | 6429040200 | Offset in the file: 0x199F20 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_BJL3__CV152400/// | Offset in the file: 0x140BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 6429040200 and software number 10SW003825 P695BJL3. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| 6429040200 | 0064467140 - 6429024303 - 6429033715 | Mercedes-Benz ML350 3.0 CDI V6 |
| 6429040200 | 0064467140 - 6429025702 - 6429034109 | Mercedes-Benz ML350 3.0 CDI V6 |
| 6429040200 | 1037516343 | Mercedes-Benz ML 350 CDI, Mercedes-Benz GL 350 CDI |
| 6429040200 | 1037534053 | Mercedes-Benz ML350 3.0 CDI V6 |
| 6429040200 | 10SW056403 P695BJLO | Mercedes-Benz ML 350 CDI |
| 6429040200 | 10SW065541 P695BJLQ | Mercedes-Benz ML 350 CDI |
| 6429040300 | 1037516354 | Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 3.0 CDI V6, Mercedes-Benz Sprinter 319 CDI |
| 6429040300 | 10SW009552 P695DEC1 | Mercedes-Benz Sprinter 319 CDI |