Original file

Mercedes-Benz GLK 250 CDI Bosch EDC17CP46 6519023001 / 1037516341

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK 250 CDI, hardware number 6519023001 and software number 1037516341, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK 250 CDIdiesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
6519023001
Software number
1037516341
Bosch part / software
1037530282

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK 250 CDI
Enginediesel 204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6519023001
Software number1037516341
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyfa33f2722d6a6e5b
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037530282Offset in the file: 0x02001A
Software / calibration6519023001Offset in the file: 0x02022F
Data set number6519030840Offset in the file: 0x26304C
Boot software6519040101Offset in the file: 0x00FC51
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGW1__CV123100///Offset in the file: 0x058510

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519023001 and software number 1037516341. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
642904020010SW056403 P695BJLOMercedes-Benz ML 350 CDI
642904020010SW065541 P695BJLQMercedes-Benz ML 350 CDI
64290403001037516354Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 3.0 CDI V6, Mercedes-Benz Sprinter 319 CDI
642904030010SW009552 P695DEC1Mercedes-Benz Sprinter 319 CDI
651902300110SW040621 P695CGW1Mercedes-Benz GLK 220 CDI
651904010110SW062293 P695CGWEMercedes-Benz GLK 250 CDI
A64290000011037516354Mercedes-Benz Sprinter
CR42-651-CDW2-X204WA2X-100KW-CH4N-EU5OP-LL-EF-002_ME04_HPT1037516341Mercedes-Benz GLK

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page