Original file

Mercedes-Benz GLK 220 CDI Bosch EDC17CP46 6519023001 / 10SW040621 P695CGW1

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK 220 CDI, hardware number 6519023001 and software number 10SW040621 P695CGW1, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK 220 CDIdiesel 170.0PS / 125.0kW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519023001
Software number
10SW040621 P695CGW1
Bosch part / software
10SW040621

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK 220 CDI
Enginediesel 170.0PS / 125.0kW
Displacement2.2
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware number6519023001
Software number10SW040621 P695CGW1
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd3180eb9b40a8a5a
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW040621Offset in the file: 0x00001A
Software / calibration6519023001Offset in the file: 0x063041
Data set number6519037056Offset in the file: 0x06304C
Boot software6519040101Offset in the file: 0x063036
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGW1__CV123100///Offset in the file: 0x000BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519023001 and software number 10SW040621 P695CGW1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
642904020010SW065541 P695BJLQMercedes-Benz ML 350 CDI
64290403001037516354Mercedes-Benz Sprinter, Mercedes-Benz Sprinter 3.0 CDI V6, Mercedes-Benz Sprinter 319 CDI
642904030010SW009552 P695DEC1Mercedes-Benz Sprinter 319 CDI
65190230011037516341Mercedes-Benz GLK 250 CDI
651904010110SW062293 P695CGWEMercedes-Benz GLK 250 CDI
A64290000011037516354Mercedes-Benz Sprinter
CR42-651-CDW2-X204WA2X-100KW-CH4N-EU5OP-LL-EF-002_ME04_HPT1037516341Mercedes-Benz GLK
CR42-651-CDW2-X204WA2X-100KW-CH4N-EU5OP-LL-EF-002_ME04_HPT1037526713Mercedes-Benz GLK200

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page