Original file

Mercedes-Benz GLK-Class Bosch EDC17CP46 CR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300 / 10SW001870

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK-Class, hardware number CR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300 and software number 10SW001870, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK-Class2.1 diesel 169PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300
Software number
10SW001870
Software / calibration
6519023001

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK-Class
Engine2.1 diesel 169PS
Power169.3PS / 124.5kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300
Software number10SW001870
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key77aaf81df62c0876
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW001870Offset in the file: 0x20001A
Software / calibration6519023001Offset in the file: 0x263041
Data set number6519030740Offset in the file: 0x26304C
Boot software6519040101Offset in the file: 0x263036
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGW1__CV123100///Offset in the file: 0x200BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300 and software number 10SW001870. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz Glk220Flash · From the file name: 3992,048.00 KB€15Add to cart
Mercedes-Benz Glk220Flash768.00 KB€15Add to cart

All reads of CR42-651-CGW1-X204WA4X-125KW-CH4N-EU6OPS-LL-EF-019_ME152300 / 10SW001870

Other pairs of Bosch EDC17CP46

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page