Original file

Mercedes-Benz GLK250Bluetec 4matic Bosch EDC17CP46 CR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700 / 10SW059721

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK250Bluetec 4matic, hardware number CR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700 and software number 10SW059721, 768.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLK250Bluetec 4matic2.1 diesel 150KW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
768.00 KB · Flash
Hardware number
CR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700
Software number
10SW059721
Software / calibration
6519021803

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLK250Bluetec 4matic
Engine2.1 diesel 150KW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700
Software number10SW059721
File
File typeOriginal flash read
File size768.00 KB (786,432 bytes)
From the file nameL533CC0
File key9c0efcf9a53030d3
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW059721Offset in the file: 0x00001A
Software / calibration6519021803Offset in the file: 0x066F95
Data set number6519037768Offset in the file: 0x066FA0
Boot software6519040101Offset in the file: 0x066F8A
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_CGWD__CV194400///Offset in the file: 0x001080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700 and software number 10SW059721. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz GLK50Flash4,096.00 KB€15Add to cart
Mercedes-Benz GLKFlash2,048.00 KB€15Add to cart
Mercedes-Benz GLK250Flash2,048.00 KB€15Add to cart

All reads of CR42-651-CGWD-X204WA4X-150KW-CH4N-EU6OPS-LL-EF-003_ME194700 / 10SW059721

Other pairs of Bosch EDC17CP46

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page