Original file
Mercedes-Benz GLK250 Bosch EDC17CP46 CR42-651-CIW1-X204WAX_MY15-200 / 1037544895
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLK250, hardware number CR42-651-CIW1-X204WAX_MY15-200 and software number 1037544895, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLK250OM651 · 204.0PS / 150.0kW
- Control unit
- Bosch EDC17CP46
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR42-651-CIW1-X204WAX_MY15-200
- Software number
- 1037544895
- Software / calibration
- 6519027401
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLK250 |
| Engine | OM651 |
| Fuel | Diesel |
| Displacement | 2.2 |
| Power | 204.0PS / 150.0kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR42-651-CIW1-X204WAX_MY15-200 |
| Software number | 1037544895 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 1c874c07c811ca49 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037544895 | Offset in the file: 0x20001A |
| Software / calibration | 6519027401 | Offset in the file: 0x2640ED |
| Data set number | 6519035233 | Offset in the file: 0x2640F8 |
| Boot software | 6519040101 | Offset in the file: 0x2640E2 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_CIW1__CV132700/// | Offset in the file: 0x200BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR42-651-CIW1-X204WAX_MY15-200 and software number 1037544895. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR42-651-CGWE-X204WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-003_M | 10SW062293 | Mercedes-Benz GLK, Mercedes-Benz GLK250 |
| CR42-651-CGWE-X204WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-006_M | 10SW086334 | Mercedes-Benz GLK |
| CR42-651-CHW0-X204WA4X_MY14-200HP-CH4N-BIN5OPS-LL-EF-022_ME | 1037516341 | Mercedes-Benz GLK |
| CR42-651-CHW0-X204WA4X_MY14-200HP-CH4N-BIN5OPS-LL-EF-022_ME | 1037540597 | Mercedes-Benz GLK |
| CR42-651-CIW1-X204WAX_MY15-200HP-CH4N-BIN5OPS-LL-EF-023_ME1 | 1037516341 | Mercedes-Benz GLK |
| CR42-651-CIW1-X204WAX_MY15-200HP-CH4N-BIN5OPS-LL-EF-023_ME1 | 1037544895 | Mercedes-Benz GLK |
| CR42-651-CXW0-X204WAX_MY15-200HP-CH4N-BIN5OPS-LL_CUKAT-EF-0 | 10SW078816 | Mercedes-Benz GLK |
| CR60-642-9GLK-164XA_OES-155KW-EU6_NOXTT3-ME03 | 10SW087463 | Mercedes-Benz ML |