Original file
Mercedes-Benz R300 Bosch EDC17CP46 CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04 / 1037512405
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz R300, hardware number CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04 and software number 1037512405, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz R3003.0 diesel 190PS
- Control unit
- Bosch EDC17CP46
- Read type
- OBD read (no boot area)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04
- Software number
- 1037512405
- Bosch part / software
- 1037508997
- Software / calibration
- 6429020501
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | R300 |
| Engine | 3.0 diesel 190PS |
| Power | 190.3PS / 140.0kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04 |
| Software number | 1037512405 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 0cc449312759db63 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Bosch part / software | 1037508997 | Offset in the file: 0x14001A |
| Software / calibration | 6429020501 | Offset in the file: 0x076E3F |
| Data set number | 6429031702 | Offset in the file: 0x076E4A |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_70L8__CV101300/// | Offset in the file: 0x040BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04 and software number 1037512405. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR60-642-9GLK-164XA_OES-155KW-EU6_NOXTT3-ME03 | 10SW087463 | Mercedes-Benz ML |
| CR60-642LS-70L8-CH4_Q2-218CA-LS-EU5OP_4X2-ME03 | 1037510887 | Mercedes-Benz CLS |
| CR60-642LS-70L8-CH4_Q2-251WA-LS-EU5OP_4X4-ME04 | 1037503394 | Mercedes-Benz R350 |
| CR60-642LS-70L8-CH4_Q2-251WA-LS_140KW-EU5OP_4X2-ME04 | 1037503394 | Mercedes-Benz R280, Mercedes-Benz R |
| CR60-642LS-70L8-Ch4_Q2-218CA-LS-EU5OP_4x2-ME03 | 1037510887 | Mercedes-Benz CLS |
| CR60-642LS-70L8-Ch4_Q2-251WA-LS-EU5OP_4x4-ME04 | 1037512404 | Mercedes-Benz E350 |
| CR60-642LS-70L8-Ch4_Q2-251WA-LS_140kW-EU5OP_4x2-ME04 | 1037512405 | Mercedes-Benz R300 |
| CR60-642LS-7AL9-CH4_Q2-164XA-LS-EU5OP_4X4-ME03 | 1037503394 | Mercedes-Benz GL350, Mercedes-Benz ML350 |