Original file

Mercedes-Benz E350 Bosch EDC17CP46 CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05 / 1037543356

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz E350, hardware number CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05 and software number 1037543356, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E350265PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05
Software number
1037543356
Software / calibration
6429023101

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine265PS
FuelDiesel
Displacement3.0
Power265PS / 194.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05
Software number1037543356
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameL533CC0
File keyd5afc99d399f1c3a
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037543356Offset in the file: 0x24001A
Software / calibration6429023101Offset in the file: 0x2238B3
Data set number6429030309Offset in the file: 0x2238BE
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_7AL9__CV103500///Offset in the file: 0x240BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05 and software number 1037543356. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz EFlash2,048.00 KB€15Add to cart
Mercedes-Benz E350Flash2,048.00 KB€15Add to cart

All reads of CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME05 / 1037543356

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
CR60-642LS-7AL9-CH4_Q2-164XA-LS-EU5OP_4X4-ME041037543357Mercedes-Benz GL350
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME041037503394Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz GL350
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME041037512473Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz CLS
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X2-ME051037503394Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz ML
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X4-ME041037503394Mercedes-Benz E350, Mercedes-Benz E
CR60-642LS-7AL9-CH4_Q2-212SA-LS-EU5OP_4X4-ME041037512474Mercedes-Benz E, Mercedes-Benz E350, Mercedes-Benz CLS 3.5CDI
CR60-642LS-7AL9-CH4_Q2-218CA-LS-EU5OP_4X2-ME041037503394Mercedes-Benz CLS
CR60-642LS-7AL9-CH4_Q2-218CA-LS-EU5OP_4X2-ME041037512475Mercedes-Benz CLS W218

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page