Original file

Mercedes-Benz E300 V6 Blue Efficiency Bosch EDC17CP46 CR60-642LS-9GL0-Ch4_Q2-212WA-EU5OP_4x2_3S_RED-ME02 / 1037516369

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz E300 V6 Blue Efficiency, hardware number CR60-642LS-9GL0-Ch4_Q2-212WA-EU5OP_4x2_3S_RED-ME02 and software number 1037516369, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E300 V6 Blue Efficiency3.0 diesel · 231.0PS / 169.9kW
Control unit
Bosch EDC17CP46
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
CR60-642LS-9GL0-Ch4_Q2-212WA-EU5OP_4x2_3S_RED-ME02
Software number
1037516369
Bosch part / software
1037516373
Software / calibration
6429021501

Technical data

Vehicle
BrandMercedes-Benz
Car modelE300 V6 Blue Efficiency
Engine3.0 diesel
Power231.0PS / 169.9kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60-642LS-9GL0-Ch4_Q2-212WA-EU5OP_4x2_3S_RED-ME02
Software number1037516369
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameMB E300 3.0 CDI V6
File keya52a729697982ef5
Identification read from the file
ECU nameEDC17CP46
Read typeOBD read (no boot area)
Bosch part / software1037516373Offset in the file: 0x14001A
Software / calibration6429021501Offset in the file: 0x021035
Data set number6429033703Offset in the file: 0x021040
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GL0__CV112800///Offset in the file: 0x040BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60-642LS-9GL0-Ch4_Q2-212WA-EU5OP_4x2_3S_RED-ME02 and software number 1037516369. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page