Original file

Mercedes-Benz ML350 Bosch EDC17CP46 CR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25 / 1037503394

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz ML350, hardware number CR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25 and software number 1037503394, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML3503.0 diesel · 256.0PS / 188.3kW
Control unit
Bosch EDC17CP46
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
CR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25
Software number
1037503394
Bosch part / software
1037529328
Software / calibration
6429020602

Technical data

Vehicle
BrandMercedes-Benz
Car modelML350
Engine3.0 diesel
Power256.0PS / 188.3kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25
Software number1037503394
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye4ec8d5a80183bec
Identification read from the file
ECU nameEDC17CP46
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037529328Offset in the file: 0x02001A
Software / calibration6429020602Offset in the file: 0x02022B
Data set number6429033709Offset in the file: 0x27EDA4
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_9GL2__CV132800///Offset in the file: 0x04A588

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25 and software number 1037503394. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz ML350Flash4,096.00 KB€15Add to cart
Mercedes-BenzFlash4,096.00 KB€15Add to cart

All reads of CR60-642LS-9GL2-Ch4_Q2-166WA-EU6OPS_4x4_3S-ME25 / 1037503394

Other pairs of Bosch EDC17CP46

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page