Original file

Mercedes-Benz S Bosch EDC17CP46 CR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01 / 10SW004790

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz S, hardware number CR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01 and software number 10SW004790, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sdiesel 258PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01
Software number
10SW004790
Software / calibration
6429025802

Technical data

Vehicle
BrandMercedes-Benz
Car modelS
Enginediesel 258PS
Displacement3.0
Power258.3PS / 190kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01
Software number10SW004790
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key04d4777f7cc24a2d
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW004790Offset in the file: 0x14001A
Software / calibration6429025802Offset in the file: 0x199E97
Data set number6429034807Offset in the file: 0x199EA2
Boot software6429040200Offset in the file: 0x199E8C
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_BJLC__CV152500///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01 and software number 10SW004790. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz S350Flash4,096.00 KB€15Add to cart

All reads of CR60-BJLC-221WA-642LS-BIN5OPS_4X4_MY13-ME28_01 / 10SW004790

Other pairs of Bosch EDC17CP46

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page