Original file
Mercedes-Benz GLS350 Bosch EDC17CP46 CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26 / 6429011500
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GLS350, hardware number CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26 and software number 6429011500, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLS350OM642 · 258.0PS / 189.8kW
- Control unit
- Bosch EDC17CP46
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26
- Software number
- 6429011500
- Bosch part / software
- 10SW003954
- Software / calibration
- 6429020402
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLS350 |
| Engine | OM642 |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 258.0PS / 189.8kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26 |
| Software number | 6429011500 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | b91626fd4668ec24 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW003954 | Offset in the file: 0x34001A |
| Software / calibration | 6429020402 | Offset in the file: 0x39B537 |
| Data set number | 6429038709 | Offset in the file: 0x39B542 |
| Boot software | 0009040200 | Offset in the file: 0x39B52C |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_BLL0__CV134100/// | Offset in the file: 0x340BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26 and software number 6429011500. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR60-BLL0-166WA-642LS-BIN5OPS_4x4_MY15-ME26 | 1037516343 | Mercedes-Benz ML350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_4X4_MY15-ME21 | 1037516343 | Mercedes-Benz GL 350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_4X4_MY15-ME26 | 1037516343 | Mercedes-Benz GL350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME21 | 1037516343 | Mercedes-Benz GL350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 1037516343 | Mercedes-Benz GL |
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 10SW003960 | Mercedes-Benz GL 350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 | 1037516343 | Mercedes-Benz GL350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 | 10SW071755 | Mercedes-Benz GL350 |