Original file
Mercedes-Benz GL350 Bosch EDC17CP46 CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 / 1037516343
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GL350, hardware number CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 and software number 1037516343, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GL3503.0 diesel
- Control unit
- Bosch EDC17CP46
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40
- Software number
- 1037516343
- Bosch part / software
- 10SW071073
- Software / calibration
- 6429023704
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GL350 |
| Engine | 3.0 diesel |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 |
| Software number | 1037516343 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | d4eee6a6da53b9af |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW071073 | Offset in the file: 0x02001A |
| Software / calibration | 6429023704 | Offset in the file: 0x02022F |
| Data set number | 6429039117 | Offset in the file: 0x39C856 |
| Boot software | 6429040200 | Offset in the file: 0x00FC51 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_BUL2__CV203400/// | Offset in the file: 0x0587C8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 and software number 1037516343. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME21 | 1037516343 | Mercedes-Benz GL350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_4x4_MY15-ME26 | 6429011500 | Mercedes-Benz GLS350 |
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 1037516343 | Mercedes-Benz GL |
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 10SW003960 | Mercedes-Benz GL 350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 | 10SW071755 | Mercedes-Benz GL350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40 | 6429023704 | Mercedes-Benz GL350 |
| CR60-BUL2-CH4_Q2-166WA-BIN5OPS_NOXTT3_4X4_CUKAT-ME42 | 10SW088882 | Mercedes-Benz ML |
| CR60NFZ-642-CCL0-906A_NAG1-140kW-NAFTA13_OPS-5.0T-ME02 | 1037516354 | Mercedes-Benz Sprinter |