Original file
Mercedes-Benz GL350 Bosch EDC17CP46 CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40 / 6429023704
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz GL350, hardware number CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40 and software number 6429023704, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GL350OM642 · 245.0PS / 180.2kW
- Control unit
- Bosch EDC17CP46
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40
- Software number
- 6429023704
- Bosch part / software
- 10SW071755
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GL350 |
| Engine | OM642 |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 245.0PS / 180.2kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40 |
| Software number | 6429023704 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 21c6c23c1ae24c36 |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW071755 | Offset in the file: 0x14001A |
| Software / calibration | 6429023704 | Offset in the file: 0x19C84B |
| Data set number | 6429039117 | Offset in the file: 0x19C856 |
| Boot software | 6429040200 | Offset in the file: 0x19C840 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_BUL2__CV203400/// | Offset in the file: 0x141080 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR60-BUL2-166XA-642LS-BIN5OPS_NOxTT3_4x4_CuKat_MY15-ME40 and software number 6429023704. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 1037516343 | Mercedes-Benz GL |
| CR60-BLL0-166XA-642LS-BIN5OPS_NOXTT3_4X4_MY15-ME26 | 10SW003960 | Mercedes-Benz GL 350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 | 1037516343 | Mercedes-Benz GL350 |
| CR60-BUL2-166XA-642LS-BIN5OPS_NOXTT3_4X4_CUKAT_MY15-ME40 | 10SW071755 | Mercedes-Benz GL350 |
| CR60-BUL2-CH4_Q2-166WA-BIN5OPS_NOXTT3_4X4_CUKAT-ME42 | 10SW088882 | Mercedes-Benz ML |
| CR60NFZ-642-CCL0-906A_NAG1-140kW-NAFTA13_OPS-5.0T-ME02 | 1037516354 | Mercedes-Benz Sprinter |
| CR60NFZ-642-CDL0-906A_NAG1-140kW-NAFTA13_MY13_OPS-3 | 1037516354 | Mercedes-Benz Sprinter |
| CR60NFZ-642-CDL0-906A_NAG1-140kW-NAFTA13_MY14_OPS-3 | 1037516354 | Mercedes-Benz Sprinter |