Original file

Mercedes-Benz Bosch EDC17CP46 CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01 / 1037547167

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz, hardware number CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01 and software number 1037547167, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz190PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01
Software number
1037547167
Software / calibration
6429022002

Technical data

Vehicle
BrandMercedes-Benz
Engine190PS
FuelDiesel
Displacement3.0
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01
Software number1037547167
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key649115d97e10761b
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037547167Offset in the file: 0x34001A
Software / calibration6429022002Offset in the file: 0x2044BD
Data set number6429038607Offset in the file: 0x2044C8
Boot software6429040300Offset in the file: 0x2044B2
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DDC1__CV134600///Offset in the file: 0x340BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01 and software number 1037547167. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart

All reads of CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_01 / 1037547167

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
CR60NFZ-642-DCC1-906A_NAG2-140kW-EURO6_OPS-ME02_051037535765Mercedes-Benz Sprinter 319, Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
CR60NFZ-642-DCC1-906M-140kW-EURO6_OPS-ME02_051037535765Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_021037543684Mercedes-Benz Sprinter BR PERFORMANCE
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_011037516354Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906A_NAG2-140kW-EURO6_OPS-ME04_011037516354Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter319
CR60NFZ-642-DDC1-906A_NAG2-140kW-EURO6_OPS-ME04_011037547167Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906M-140kW-EURO6_OPS-ME03_021037543684Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906M-140kW-EURO6_OPS-ME04_011037547167Mercedes-Benz Sprinter

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page