Original file

Mercedes-Benz Sprinter219/319/419/519 Bosch EDC17CP46 CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1 / 10SW011466

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter219/319/419/519, hardware number CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1 and software number 10SW011466, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter219/319/419/5193.0 diesel 140KW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1
Software number
10SW011466
Software / calibration
6429022602

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter219/319/419/519
Engine3.0 diesel 140KW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1
Software number10SW011466
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2175a0f0ed7d0d4b
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW011466Offset in the file: 0x14001A
Software / calibration6429022602Offset in the file: 0x196983
Data set number6429038807Offset in the file: 0x19698E
Boot software6429040300Offset in the file: 0x196978
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DEC1__CV145000///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1 and software number 10SW011466. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash2,048.00 KB€15Add to cart
Mercedes-Benz SprinterFlash4,096.00 KB€15Add to cart

All reads of CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_1 / 10SW011466

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIa_OPS-ME05_21037555769Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIa_OPS-ME05_210SW014397Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_11037516354Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter519
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_11037555769Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906A_NAG1-140kW-EUROVIc_OPS-ME06_110SW011466P695DEC1Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906A_NAG2-140kW-EURO6_OPS-ME0501_011037516354Mercedes-Benz Sprinter219/319/419/519
CR60NFZ-642-DEC1-906A_NAG2-140kW-EURO6_OPS-ME05_041037555769Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter SCHMIDDI !
CR60NFZ-642-DEC1-906A_NAG2-140kW-EUROVIa_OPS-ME05_2014397Mercedes-Benz Sprinter

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page