Original file
Mercedes-Benz Bosch EDC17CP46 CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME221900 / 1037516354
An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz, hardware number CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME221900 and software number 1037516354, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz190PS
- Control unit
- Bosch EDC17CP46
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME221900
- Software number
- 1037516354
- Bosch part / software
- 10SW088499
- Software / calibration
- 6429024204
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Engine | 190PS |
| Power | 190.3PS / 140.0kW |
| Control unit | Bosch EDC17CP46 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME221900 |
| Software number | 1037516354 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | b7280446f5ec31cc |
| ECU name | EDC17CP46 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW088499 | Offset in the file: 0x02001A |
| Software / calibration | 6429024204 | Offset in the file: 0x02022F |
| Data set number | 6429034420 | Offset in the file: 0x204440 |
| Boot software | 6429040300 | Offset in the file: 0x00FC51 |
| Bosch project identifier (EPK) | 46/1/EDC17CP46/1/P695//P_695_DJC0__CV212500/// | Offset in the file: 0x05B444 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME221900 and software number 1037516354. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP46
| Hardware | Software | Vehicles |
|---|---|---|
| CR60NFZ-642-DEC1-906M-140kW-EURO6_OPS-ME05_04 | 1037555769 | Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter BR PERFORMANCE |
| CR60NFZ-642-DEC1-906M-140kW-EUROVIa_OPS-ME05_2 | 10SW014397 | Mercedes-Benz Sprinter |
| CR60NFZ-642-DEC1-906M-140kW-EUROVIc_OPS-ME06_1 | 1037516354 | Mercedes-Benz Sprinter |
| CR60NFZ-642-DEC1-906M-140kW-EUROVIc_OPS-ME06_1 | 10SW011466 | Mercedes-Benz Sprinter |
| CR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900 | 10SW091361 | Mercedes-Benz |
| CR61-DCB1-212WA-642LS-EU6OPS_4X2_3S-ME03 | 1037533187 | Mercedes-Benz E |
| WDB9066331S | 1037516354 | Mercedes-Benz Sprinter |
| WDB9066351P | 1037516354 | Mercedes-Benz Sprinter224/324/424/524 |