Original file

Mercedes-Benz Bosch EDC17CP46 CR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900 / 10SW091361

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz, hardware number CR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900 and software number 10SW091361, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz190PS
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900
Software number
10SW091361
Software / calibration
6429024204

Technical data

Vehicle
BrandMercedes-Benz
Engine190PS
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900
Software number10SW091361
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key240ae8f4d82db372
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software10SW091361Offset in the file: 0x34001A
Software / calibration6429024204Offset in the file: 0x204435
Data set number6429034420Offset in the file: 0x204440
Boot software6429040300Offset in the file: 0x20442A
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DJC0__CV212500///Offset in the file: 0x341080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60NFZ-642-DJC0-906M-140kW-EUROVIc_OPS-DS014_ME221900 and software number 10SW091361. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
CR60NFZ-642-DEC1-906M-140kW-EUROVIa_OPS-ME05_210SW014397Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906M-140kW-EUROVIc_OPS-ME06_11037516354Mercedes-Benz Sprinter
CR60NFZ-642-DEC1-906M-140kW-EUROVIc_OPS-ME06_110SW011466Mercedes-Benz Sprinter
CR60NFZ-642-DJC0-906A_NAG1-140kW-EUROVIc_OPS-DS014_ME2219001037516354Mercedes-Benz
CR61-DCB1-212WA-642LS-EU6OPS_4X2_3S-ME031037533187Mercedes-Benz E
WDB9066331S1037516354Mercedes-Benz Sprinter
WDB9066351P1037516354Mercedes-Benz Sprinter224/324/424/524
WDB9066351S1037516354Mercedes-Benz Sprinter KORBEL, Mercedes-Benz Sprinter EEPROM

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page