Original file

Opel Insignia 2.0 CDTTI Bosch EDC17CP47 0281030896 / 1037534718

An original (stock) flash read of the Bosch EDC17CP47 control unit, fitted in Opel Insignia 2.0 CDTTI, hardware number 0281030896 and software number 1037534718, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Insignia 2.0 CDTTI2.0 diesel 195.0PS / 143.4kW
Control unit
Bosch EDC17CP47
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281030896
Software number
1037534718
Software / calibration
P_808_EDC17CP47_OF0CPS_2

Technical data

Vehicle
BrandOpel
Car modelInsignia 2.0 CDTTI
Engine2.0 diesel 195.0PS / 143.4kW
Control unit
Control unitBosch EDC17CP47
ECU makerBosch
Hardware number0281030896
Software number1037534718
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9d4b296877974ace
Identification read from the file
ECU nameEDC17CP47
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037534718Offset in the file: 0x02001A
Software / calibrationP_808_EDC17CP47_OF0CPS_2Offset in the file: 0x03AF78
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)54/1/EDC17_CP47/808/P_808//P_808_EDC17CP47_OF0CPS_2///Offset in the file: 0x03AF78

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP47 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030896 and software number 1037534718. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Opel InsigniaFlash4,096.00 KB€15Add to cart
Opel InsigniaFlash4,096.00 KB€15Add to cart
Opel InsigniaFlash4,096.00 KB€15Add to cart

All reads of 0281030896 / 1037534718

Other pairs of Bosch EDC17CP47

HardwareSoftwareVehicles
02810194721037529730Opel Insignia
02810307751037534457Chevrolet CRUZ 2014y 2.0CDTI
02810308961037529753Opel Insignia
02810308961037529756Opel Insignia
02810310911037563329Chevrolet Cruze
02810311591037529844Opel Cascada
02810311591037529850Opel Insignia
02810311591037529851Opel Insignia

Bosch EDC17CP47 original files

The Bosch EDC17CP47 unit page