Original file

Opel Cascada Bosch EDC17CP47 0281031159 / 1037543142

An original (stock) flash read of the Bosch EDC17CP47 control unit, fitted in Opel Cascada, hardware number 0281031159 and software number 1037543142, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Cascada2.0 diesel · 195.0PS / 143.4kW
Control unit
Bosch EDC17CP47
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031159
Software number
1037543142
Software / calibration
P_808_EDC17CP47_OF3CPS_0

Technical data

Vehicle
BrandOpel
Car modelCascada
Engine2.0 diesel
Power195.0PS / 143.4kW
Control unit
Control unitBosch EDC17CP47
ECU makerBosch
Hardware number0281031159
Software number1037543142
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8bbbdc947e85323b
Identification read from the file
ECU nameEDC17CP47
Read typeCalibration only (data set)
Bosch part / software1037543142Offset in the file: 0x04001A
Software / calibrationP_808_EDC17CP47_OF3CPS_0Offset in the file: 0x040A10
Bosch project identifier (EPK)54/1/EDC17_CP47/808/P_808//P_808_EDC17CP47_OF3CPS_0///Offset in the file: 0x040A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP47 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031159 and software number 1037543142. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP47

HardwareSoftwareVehicles
02810311591037541123Opel Insignia, Opel Astra, Opel Cascada
02810311591037543136Opel Astra
02810311591037543139Opel Zafira
02810311591037543140Opel Astra
02810311591037543143Opel Insignia
02810311591037543144Opel Insignia
02810311591037543145Opel Insignia
02810311591037543146Opel Insignia

Bosch EDC17CP47 original files

The Bosch EDC17CP47 unit page