Original file

Volvo XC70 Bosch EDC17CP48 0281018414 / 1037534348

An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo XC70, hardware number 0281018414 and software number 1037534348, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC702.4 diesel 181PS
Control unit
Bosch EDC17CP48
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281018414
Software number
1037534348
Software / calibration
31321233 AA

Technical data

Vehicle
BrandVolvo
Car modelXC70
Engine2.4 diesel 181PS
Power181.0PS / 133.1kW
Control unit
Control unitBosch EDC17CP48
ECU makerBosch
Hardware number0281018414
Software number1037534348
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyae3b67e231c07e99
Identification read from the file
ECU nameEDC17CP48
Read typeCalibration only (data set)
Bosch part / software1037534348Offset in the file: 0x14001A
Software / calibration31321233 AAOffset in the file: 0x18F040
Bosch project identifier (EPK)51/1/EDC17_CP48/19/P_929//C929U100A_38pre4_P_929///Offset in the file: 0x140BA0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018414 and software number 1037534348. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP48

Bosch EDC17CP48 original files

The Bosch EDC17CP48 unit page