Original file

Volvo V40 Bosch EDC17CP48 1420_U102BCVC40p7_Y555A177hp_M02 / 1037516786

An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo V40, hardware number 1420_U102BCVC40p7_Y555A177hp_M02 and software number 1037516786, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo V402.0 diesel 150PS
Control unit
Bosch EDC17CP48
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
1420_U102BCVC40p7_Y555A177hp_M02
Software number
1037516786
Bosch part / software
1037545295
Software / calibration
31372545 AA

Technical data

Vehicle
BrandVolvo
Car modelV40
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17CP48
ECU makerBosch
Hardware number1420_U102BCVC40p7_Y555A177hp_M02
Software number1037516786
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5c43ec34bc752f0f
Identification read from the file
ECU nameEDC17CP48
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037545295Offset in the file: 0x02001A
Software / calibration31372545 AAOffset in the file: 0x38F1C8
Boot software31336984 AAOffset in the file: 0x00FC1B
Bosch project identifier (EPK)51/1/EDC17_CP48/19/P_929//C929U102B_40pre7_P_929///Offset in the file: 0x03B8A4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1420_U102BCVC40p7_Y555A177hp_M02 and software number 1037516786. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP48

HardwareSoftwareVehicles
05313725451037516786Volvo V40
07313212331037516786Volvo XC60, Volvo V70
07313212331037532584Volvo XC60
1037516786 P929070A1037516786Volvo XC70 2.4 D5, Volvo XC60 2.4 D5
1420_U102B_CVC40_pre7_Y555_M_150hp_M021037516786Volvo V40
311A_U70B_V152_Y28x_A_AWD_HP_M071037516786Volvo XC70
311A_U75D_V152_Y413_A_AWD_HP_M091037516786Volvo XC60
31321233 AA1037516786Volvo S60 2.0 D3, Volvo V60 2.0 D, Volvo V70 2.0 D4

Bosch EDC17CP48 original files

The Bosch EDC17CP48 unit page