Original file
Volvo XC60 Bosch EDC17CP48 311A_U75D_V152_Y413_A_AWD_HP_M09 / 1037516786
An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo XC60, hardware number 311A_U75D_V152_Y413_A_AWD_HP_M09 and software number 1037516786, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Volvo XC602.4 diesel 215PS
- Control unit
- Bosch EDC17CP48
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- 311A_U75D_V152_Y413_A_AWD_HP_M09
- Software number
- 1037516786
- Bosch part / software
- 1037522706
- Software / calibration
- 31321233 AA
Technical data
| Brand | Volvo |
|---|---|
| Car model | XC60 |
| Engine | 2.4 diesel 215PS |
| Power | 215.0PS / 158.1kW |
| Control unit | Bosch EDC17CP48 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 311A_U75D_V152_Y413_A_AWD_HP_M09 |
| Software number | 1037516786 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | d39b83ab13d9c9e4 |
| ECU name | EDC17CP48 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037522706 | Offset in the file: 0x02001A |
| Software / calibration | 31321233 AA | Offset in the file: 0x38E6A4 |
| Boot software | 31336984 AA | Offset in the file: 0x00FC1B |
| Bosch project identifier (EPK) | 44/1/EDC17_CP48/19/P_929//C929U75D_CVC152/// | Offset in the file: 0x03BC58 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 311A_U75D_V152_Y413_A_AWD_HP_M09 and software number 1037516786. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP48
| Hardware | Software | Vehicles |
|---|---|---|
| 1037516786 P929070A | 1037516786 | Volvo XC70 2.4 D5, Volvo XC60 2.4 D5 |
| 1420_U102BCVC40p7_Y555A177hp_M02 | 1037516786 | Volvo V40 |
| 1420_U102B_CVC40_pre7_Y555_M_150hp_M02 | 1037516786 | Volvo V40 |
| 311A_U70B_V152_Y28x_A_AWD_HP_M07 | 1037516786 | Volvo XC70 |
| 31321233 AA | 1037516786 | Volvo S60 2.0 D3, Volvo V60 2.0 D, Volvo V70 2.0 D4 |
| 31336983 | 1037516786 | Volvo XC60, Volvo XC90, Volvo S80 |
| 31336983 AA | 1037516786 | Volvo V70 2.0 D, Volvo XC60 2.0 D, Volvo XC60 2.0D D3 |
| 31336984 | 1037516786 | Volvo XC60, Volvo V70, Volvo XC70 |