Original file

Volvo V40 Bosch EDC17CP48 31372545 / 1037516786

An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo V40, hardware number 31372545 and software number 1037516786, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo V402.0 petrol 150PS
Control unit
Bosch EDC17CP48
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
31372545
Software number
1037516786
Bosch part / software
1037545299
Software / calibration
31372545 AA

Technical data

Vehicle
BrandVolvo
Car modelV40
Engine2.0 petrol 150PS
Control unit
Control unitBosch EDC17CP48
ECU makerBosch
Hardware number31372545
Software number1037516786
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key149d8f15d5480265
Identification read from the file
ECU nameEDC17CP48
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037545299Offset in the file: 0x02001A
Software / calibration31372545 AAOffset in the file: 0x38F1C8
Boot software31336984 AAOffset in the file: 0x00FC1B
Bosch project identifier (EPK)51/1/EDC17_CP48/19/P_929//C929U102B_40pre7_P_929///Offset in the file: 0x03B8A4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 31372545 and software number 1037516786. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP48

HardwareSoftwareVehicles
31321233 AA1037516786Volvo S60 2.0 D3, Volvo V60 2.0 D, Volvo V70 2.0 D4
313369831037516786Volvo XC60, Volvo XC90, Volvo S80
31336983 AA1037516786Volvo V70 2.0 D, Volvo XC60 2.0 D, Volvo XC60 2.0D D3
313369841037516786Volvo XC60, Volvo V70, Volvo XC70
313725451037526280Volvo V40
313725451037534323Volvo V40
313725451037534324Volvo V40
313725451037545298Volvo V40

Bosch EDC17CP48 original files

The Bosch EDC17CP48 unit page