Original file
Volvo XC60 Bosch EDC17CP48 U97B_V33_Y413_A_AWD_MP_M03 / 1037516786
An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo XC60, hardware number U97B_V33_Y413_A_AWD_MP_M03 and software number 1037516786, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Volvo XC602.4 diesel 163PS
- Control unit
- Bosch EDC17CP48
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- U97B_V33_Y413_A_AWD_MP_M03
- Software number
- 1037516786
- Bosch part / software
- 1037526226
- Software / calibration
- 31321233 AA
Technical data
| Brand | Volvo |
|---|---|
| Car model | XC60 |
| Engine | 2.4 diesel 163PS |
| Power | 163PS / 119.9kW |
| Control unit | Bosch EDC17CP48 |
|---|---|
| ECU maker | Bosch |
| Hardware number | U97B_V33_Y413_A_AWD_MP_M03 |
| Software number | 1037516786 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | eef29aec2e64e8e8 |
| ECU name | EDC17CP48 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037526226 | Offset in the file: 0x02001A |
| Software / calibration | 31321233 AA | Offset in the file: 0x38E6DC |
| Boot software | 31336984 AA | Offset in the file: 0x00FC1B |
| Bosch project identifier (EPK) | 40/1/EDC17_CP48/19/P_929//C929U97B_33/// | Offset in the file: 0x03B4D4 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number U97B_V33_Y413_A_AWD_MP_M03 and software number 1037516786. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP48
| Hardware | Software | Vehicles |
|---|---|---|
| U97BV33Y381AAWDMPM03 | 1037516786 | Volvo X70 |
| U97BV33Y413AAWDMPM03 | 1037516786 | Volvo XC60 |
| U97B_V33_Y285_Y286_M_FWD_SIN_163 | 1037516786 | Volvo V70 |
| U97B_V33_Y28x_FWD_SID_136hp_M06 | 1037516786 | Volvo S60, Volvo V60 |
| U97B_V33_Y413_A_AWD_HP_M04 | 1037559670 | Volvo XC60 |
| U97B_V33_Y413_M_AWD_SIN_MP_M03 | 1037516786 | Volvo XC60 |
| U97B_V33_Y413_M_AWD_SIN_MP_M03 | 1037526227 | Volvo XC60 |
| U97B_V33_Y413_M_AWD_SIN_MP_M04 | 1037516786 | Volvo XC60 |