Original file

Volvo XC60 Bosch EDC17CP48 U97B_V33_Y413_M_AWD_SIN_MP_M03 / 1037526227

An original (stock) flash read of the Bosch EDC17CP48 control unit, fitted in Volvo XC60, hardware number U97B_V33_Y413_M_AWD_SIN_MP_M03 and software number 1037526227, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC602.4 diesel 163PS
Control unit
Bosch EDC17CP48
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
U97B_V33_Y413_M_AWD_SIN_MP_M03
Software number
1037526227
Software / calibration
31321233 AA

Technical data

Vehicle
BrandVolvo
Car modelXC60
Engine2.4 diesel 163PS
Power163PS / 119.9kW
Control unit
Control unitBosch EDC17CP48
ECU makerBosch
Hardware numberU97B_V33_Y413_M_AWD_SIN_MP_M03
Software number1037526227
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyff354c83f8d3b51f
Identification read from the file
ECU nameEDC17CP48
Read typeCalibration only (data set)
Bosch part / software1037526227Offset in the file: 0x14001A
Software / calibration31321233 AAOffset in the file: 0x18E6DC
Bosch project identifier (EPK)40/1/EDC17_CP48/19/P_929//C929U97B_33///Offset in the file: 0x140BA0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP48 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number U97B_V33_Y413_M_AWD_SIN_MP_M03 and software number 1037526227. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP48

Bosch EDC17CP48 original files

The Bosch EDC17CP48 unit page