Original file

BMW X5 Bosch EDC17CP49 O_7GLG0-000036FD-004 / F025-16-11-502-FS

An original (stock) flash read of the Bosch EDC17CP49 control unit, fitted in BMW X5, hardware number O_7GLG0-000036FD-004 and software number F025-16-11-502-FS, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5B47D20
Control unit
Bosch EDC17CP49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_7GLG0-000036FD-004
Software number
F025-16-11-502-FS

Technical data

Vehicle
BrandBMW
Car modelX5
EngineB47D20
FuelDiesel
Displacement2.0
Control unit
Control unitBosch EDC17CP49
ECU makerBosch
Hardware numberO_7GLG0-000036FD-004
Software numberF025-16-11-502-FS
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb3a8b24dd9541360
Identification read from the file
ECU nameEDC17CP49
Read typeFull read (boot area included)
Data set descriptionB47D20T0-F15B47T0_2W5_AT
Bosch project identifier (EPK)35/1/EDC17_CP49/11/P_1319//VGLG0///Offset in the file: 0x300DD0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_7GLG0-000036FD-004 and software number F025-16-11-502-FS. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP49

Bosch EDC17CP49 original files

The Bosch EDC17CP49 unit page