Original file

Honda CR-V IV Bosch EDC17CP50 37805-R7C-G860 / 1037537854

An original (stock) flash read of the Bosch EDC17CP50 control unit, fitted in Honda CR-V IV, hardware number 37805-R7C-G860 and software number 1037537854, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda CR-V IV2.2 · 150.0PS / 110.3kW
Control unit
Bosch EDC17CP50
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
37805-R7C-G860
Software number
1037537854
Software / calibration
P872V142

Technical data

Vehicle
BrandHonda
Car modelCR-V IV
Engine2.2
FuelDiesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17CP50
ECU makerBosch
Hardware number37805-R7C-G860
Software number1037537854
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfdfa2c96a8b92e79
Identification read from the file
ECU nameEDC17CP50
Read typeCalibration only (data set)
Bosch part / software1037537854Offset in the file: 0x00201A
Software / calibrationP872V142Offset in the file: 0x002A10
Bosch project identifier (EPK)37/1/EDC17_CP50/159/P872//P872V142///Offset in the file: 0x002A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37805-R7C-G860 and software number 1037537854. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP50

Bosch EDC17CP50 original files

The Bosch EDC17CP50 unit page