Original file

Honda Civic Bosch EDC17CP50 37820R3LG050M6 / 1037521533

An original (stock) flash read of the Bosch EDC17CP50 control unit, fitted in Honda Civic, hardware number 37820R3LG050M6 and software number 1037521533, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda Civic2.2 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17CP50
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
37820R3LG050M6
Software number
1037521533
Software / calibration
P872V123

Technical data

Vehicle
BrandHonda
Car modelCivic
Engine2.2 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17CP50
ECU makerBosch
Hardware number37820R3LG050M6
Software number1037521533
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye2e91878658623c9
Identification read from the file
ECU nameEDC17CP50
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037521533Offset in the file: 0x02001A
Software / calibrationP872V123Offset in the file: 0x03D08C
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)37/1/EDC17_CP50/159/P872//P872V123///Offset in the file: 0x03D08C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37820R3LG050M6 and software number 1037521533. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP50

Bosch EDC17CP50 original files

The Bosch EDC17CP50 unit page