Original file

Fuso Canter Bosch EDC17CP52 0110115760 / 1037508779

An original (stock) flash read of the Bosch EDC17CP52 control unit, fitted in Fuso Canter, hardware number 0110115760 and software number 1037508779, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fuso Canter3.0 149PS
Control unit
Bosch EDC17CP52
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0110115760
Software number
1037508779
Software / calibration
P_688_6_4_2_CV0B0500

Technical data

Vehicle
BrandFuso
Car modelCanter
Engine3.0 149PS
Power149PS / 109.6kW
Control unit
Control unitBosch EDC17CP52
ECU makerBosch
Hardware number0110115760
Software number1037508779
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydf7da2833b3b49ca
Identification read from the file
ECU nameEDC17CP52
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037508779Offset in the file: 0x00001A
Software / calibrationP_688_6_4_2_CV0B0500Offset in the file: 0x048C3C
Bosch project identifier (EPK)51/1/EDC17CP52_C1/242/P688//P_688_6_4_2_CV0B0500///Offset in the file: 0x048C3C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0110115760 and software number 1037508779. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP52

HardwareSoftwareVehicles
00058234051037500323Iveco Daily
00058600661037500323Iveco Daily
00058906891037500323Iveco
0059067745801467201Iveco Daily
01144851400011037508779Mitsubishi Canter
02544806401037546164Mitsubishi Canter
02544808401037546164Mitsubishi Canter
02810168161037506085Fiat ducato 3.0lL

Bosch EDC17CP52 original files

The Bosch EDC17CP52 unit page