Original file

Fiat DUCATO Bosch EDC17CP52 0281016816 / 1037506388

An original (stock) flash read of the Bosch EDC17CP52 control unit, fitted in Fiat DUCATO, hardware number 0281016816 and software number 1037506388, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat DUCATO3.0 diesel 145PS
Control unit
Bosch EDC17CP52
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281016816
Software number
1037506388
Vehicle maker's hardware number
51888307
Software / calibration
P_845_EDC17CP52_V2A0

Technical data

Vehicle
BrandFiat
Car modelDUCATO
Engine3.0 diesel 145PS
Power145.0PS / 106.6kW
Control unit
Control unitBosch EDC17CP52
ECU makerBosch
Hardware number0281016816
Software number1037506388
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key44aba993fc08f2d1
Identification read from the file
ECU nameEDC17CP52
Read typeCalibration only (data set)
Bosch part / software1037506388Offset in the file: 0x00001A
Vehicle maker's hardware number51888307Offset in the file: 0x07C379
Software / calibrationP_845_EDC17CP52_V2A0Offset in the file: 0x0006CC
Bosch project identifier (EPK)52/1/EDC17CP52_C1/242/P_845//P_845_EDC17CP52_V2A0///Offset in the file: 0x0006CC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016816 and software number 1037506388. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP52

HardwareSoftwareVehicles
01144851400011037508779Mitsubishi Canter
02544806401037546164Mitsubishi Canter
02544808401037546164Mitsubishi Canter
02810168161037506085Fiat ducato 3.0lL
02810168881037506389Fiat Ducato, Fiat Jumper, Citroën
0281016888506389Fiat Doblo
02810182901037516217Fiat Ducato
02810182911037516219Fiat Ducato, Fiat Ducato III

Bosch EDC17CP52 original files

The Bosch EDC17CP52 unit page